Before using your radio for the first time, the battery needs a full charge.

Press , then press the menu key corresponding to OFFSET (typically Key 4 or 5).

Check the repeater settings. Ensure your TX frequency matches the target repeater input. Squelch level is set too low or turned off.

For advanced users, programming your VEV-3288S with a computer is faster and allows for more detailed configuration, such as setting channel names and side-key functions.

Turn the to choose an empty channel number (from 1 to 128).

Press and hold to transmit your voice. Release immediately to listen to incoming signals.

Programming the VEV-3288S manually involves setting the properties in Frequency Mode (VFO) and saving them into a Memory Channel (MR). Step 1: Switch to Frequency Mode (VFO) Turn the radio off. Press and hold the key while turning the radio on.

is a compact VHF/UHF handheld transceiver. Because this radio is often shared with the Puxing PX-777 platform, the operations are largely identical.

Type in your desired frequency using the numerical keypad (e.g., 4 6 2 5 6 2 ). Press the key.

Press and hold the FUN key (or the designated lock key) for two seconds to lock the keypad. Repeat to unlock. This prevents accidental channel changes while carrying the radio. 6. Maintenance and Battery Care

Guangzhou Weierwei Electronics provides a support portal. Check the official site for the "WEIERWEI" brand under the support or download section. They list software and manuals for various models, though the VEV-3288S manual may be archived.

You may be trying to transmit outside the factory-locked frequency bounds of your specific hardware version. Constant background static or rushing noise

Activates Voice-Operated Exchange for hands-free transmission. Step-by-Step Programming Guide

Your squelch level is likely set to 0. Press FUN + 1 and increase the value until the static stops. Other users cannot hear your voice

Press , then press the C-CDC (or T-CDC ) key to access tone signaling. Use the arrow keys to toggle between CTCSS , DCS , or OFF .

----------------------------------------------------------------------------------------------
close