Insert the USB drive into the USB port of the projector.

Once the update hits 100%, the projector will typically reboot automatically.

A progress bar will appear on the screen.

Unplug the power cable for 5 minutes. Plug it back in and turn it on. If it stays black, the firmware file used was likely incorrect for your specific motherboard revision. To help pinpoint the right solution, please share:

The file name must match exactly what the projector’s bootloader expects. Check your manufacturer's instructions to see if you need to rename the file (e.g., changing it to GAA_UPDATE.bin ). The Projector Is Stuck in a Boot Loop

Unlike premium smart projectors running Android TV or WebOS, the standard YG300 uses a primitive, closed-source multimedia controller board (often powered by a basic Mstar chip).

Plug the power adapter into the wall and ensure it is firmly connected to the projector.

A firmware file meant for a Salange YG300 may permanently brick a Meer YG300.

The YG300 does not receive software updates from a manufacturer. However, through community-driven engineering, it can be force-updated into a functional, low-resolution Android smart projector. For the average consumer, the best software update is simply buying a $30 Android TV stick and plugging it into the HDMI port—a solution that provides modern software without risking the destruction of the device.

Resetting the system settings after an update clears out old cache files that could slow down the new software.

Charte de confiance | Publicité | Devenir partenaire | Nos partenaires | Contact | Reproduction interdite © Webastuces SARL 1997-2026