V2ray Mikrotik Jun 2026

/ip firewall mangle add chain=prerouting dst-address-type=!local in-interface=bridge1 dst-address=!YOUR_SERVER_IP action=mark-routing new-routing-mark=v2ray-table passthrough=yes Use code with caution.

Create a virtual ethernet interface (VETH) and a dedicated bridge to isolate the container traffic. v2ray mikrotik

Wait for the download. Check status:

/ip/firewall/mangle/add chain=prerouting src-address=192.168.88.0/24 \ dst-address-type=!local action=mark-connection \ new-connection-mark=v2ray-conn passthrough=yes /ip/firewall/mangle/add chain=prerouting connection-mark=v2ray-conn \ action=mark-routing new-routing-mark=v2ray-table passthrough=yes Use code with caution. 3. Add Default Route for Marked Traffic /ip firewall mangle add chain=prerouting dst-address-type=

Once your container is running, you must configure RouterOS to send traffic through it. This involves creating a special routing table to handle the traffic you want to proxy. This involves creating a special routing table to

This method details how to pull a V2Ray image, configure its parameters, and run it locally on a compatible MikroTik router. Step 1: Enable Container Support

Paste the following standardized client configuration, replacing the placeholder capital letters with your specific server details: