Manual [work]: V2000-c Rfid Access Control User

Connect one wire of the push button to the (or PUSH ) terminal.

The V2000-C is a digital keyless entry system designed for standalone operation. It does not require a computer or network connection to function; all user data and programming are stored directly on the device's internal non-volatile memory. Key Specifications Supports up to 2,000 users. Access Modes: Card only, PIN only, or Card + PIN combined.

Prevents a user from swiping twice to let in a tailgater. V2000-c Rfid Access Control User Manual

A: The system password can be reset to the factory default 12345 by performing the System Initialisation procedure. This will not delete your user cards.

Symptom: Keypad keeps buzzing, and the red light is flashing quickly. Connect one wire of the push button to

Connects to power supply ground or positive (based on lock type) Doorbell Interface Connects to an external 12V DC doorbell 3. Basic Installation and Wiring Diagram

Press 5 , flash the new EM RFID Card past the sensor reader lens, and press # . Enroll Card by Index Number: Press 5 →right arrow Enter a 3-digit slot index (e.g., 001 to 999 ) →right arrow Swipe the card →right arrow Press # . Enroll a 6-Digit Common Pin: Press 6 →right arrow Enter New 6-Digit PIN Code →right arrow Press # →right arrow Re-enter PIN Code →right arrow Press # . Deleting User Access V2000-c Access Control Manual - Facebook Key Specifications Supports up to 2,000 users

Understanding the hardware capabilities ensures a safe installation and optimal performance. 12V DC ±10%

Connect the wire of the V2000-C to the Power Supply +12V.