Phison Mpall V5.13.0c __full__ Jun 2026

: If the drive isn't detected, it may need to be put into "Test Mode" by shorting specific pins on the controller chip. Precautions

Post-flash validation

3. Drive is Entirely Unresponsive (No Light, Not Detected by MPALL)

Download or ChipGenius .

In the settings window, you must manually select the correct Burner File (e.g., BN07V502TAW.BIN ) and Firmware File (e.g., FW07V50253TW.BIN ) that match your controller and memory type.

Using MPall on a healthy drive will erase all data permanently and may void the warranty. Do not run this tool unless you are certain the drive uses a Phison controller.

If MPALL does not detect your drive at all, the controller may be completely frozen. You may need to open the plastic housing of the USB drive and short-circuit two specific pins on the controller chip using a needle while plugging it into the PC. This forces the chip into "Test Mode," allowing MPALL to see it. Conclusion Phison Mpall V5.13.0c

Phison MPall v5.13.0c is a low-level formatting and mass production tool designed exclusively for USB flash drives that use . Unlike standard Windows formatting, which only erases file system data, MPall (short for "MP Tool All") performs a firmware-level restoration.

Look for chips like PS2251-07 (PS2307) , PS2251-09 , PS2251-68 , PS2251-03 , etc.

: Use a tool like ChipGenius to identify your specific Phison controller model and Flash ID. : If the drive isn't detected, it may

is a "Mass Production Tool" specifically used to flash firmware, repair "no media" errors, or low-level format USB drives featuring Phison controllers (such as the PS2251-07). Critical Pre-Checks

Phison MPALL is an unofficial, low-level formatting and "mass production" tool designed to interact directly with the firmware of Phison controller chips found in many USB flash drives, such as those from Kingston, Toshiba, and others.