Rated for DDR3-1066 MHz or DDR3-1333 MHz. Higher speed modules (like 1600 MHz) may work if they can downclock, provided they meet the low-density structural requirement. Front Panel Header Pinout Guide
If the board fails to POST (Power On Self Test) after changing hardware, locate the JBAT1 jumper near the CMOS battery. Move the jumper from pins 1-2 to pins 2-3 for 10 seconds while the PC is completely unplugged, then return it to its original position to reset the BIOS settings.
A detailed MS-7613 Ver 1.1 Motherboard Overview is available on Scribd, showing the specific device maps and internal component routing.
If you can tell me what component you are trying to upgrade, I can check if it's compatible with the MS-7613. ms 7613 ver 11 motherboard manual link
To wrap up: the is not a direct click from MSI’s homepage, but it is readily available through their FTP archive or third-party manual repositories. The PDF contains everything you need—from jumper layouts to BIOS beep codes—to keep this legacy board running.
LGA 1156 socket with the Intel H57 Express chipset.
Direct MS-7613 Ver 1.1 Motherboard Manual & Technical Resources Rated for DDR3-1066 MHz or DDR3-1333 MHz
Used to reset the BIOS if the system does not POST. USB Headers: Connects front-panel USB ports.
24-pin ATX main power and 4-pin ATX 12V power connectors. Storage: 4 SATA 2.0 connectors.
1 × DVI-D port and 1 × VGA port (Requires a CPU with integrated Intel HD Graphics to function) Move the jumper from pins 1-2 to pins
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Motherboard Specifications, MS-7613 (Iona-GL8E)
Move jumper to pins 2-3 for 5–10 seconds while the PC is off to reset BIOS settings.
To perform the update, follow this guide:
Are you , or upgrading hardware like the CPU or RAM? Share public link