Tcr805 Total Station User Manual Work: Leica

Periodically perform a simple "two-face" measurement check (Face I and Face II) to determine if the horizontal collimation and vertical index errors are within acceptable limits. If they are out of alignment, use the built-in calibration routine under the system tools menu to re-calibrate the internal sensors.

Press or ALL to measure and calculate the orientation. The instrument will display the coordinate misclosure; accept it if it falls within your project tolerances. Method B: Orientation with Angle Select Orientation with Angle . leica tcr805 total station user manual work

setting outs, volume determinations, and tacheometry surveys Configure the communication settings in the software to

Target your second known control point, enter its ID, and repeat the measurement. Data bits: 8

Configure the communication settings in the software to match the instrument (Baud rate: 19200, Data bits: 8, Parity: None, Stop bits: 1).

Turn on the instrument, checking the battery level and ensuring the internal memory is ready for new data. 2. Navigating the Interface and Menus

Note: For the most authoritative guidance, always refer to the printed Leica TPS800-3.0.0en User Manual, which contains the full safety directions and technical specifications for your specific serial number.