: Click Target > Change Target to select your exact microcontroller family (e.g., TC39x ). Troubleshooting Common Download and Connection Issues
Infineon Memtool is a software tool designed to program and debug Infineon microcontrollers, specifically those with flash memory. The tool provides a user-friendly interface to interact with the microcontroller, allowing users to read and write data to the flash memory, as well as perform various debug functions.
Often included in the development kits or DAS (Device Access Server) installer packages on the Infineon Developer Community. What is Infineon Memtool? infineon memtool download link
Includes configuration files for the full range of Infineon evaluation boards.
Memtool is proprietary software primarily for internal Infineon use and for specific customers under NDA. It is not available as a public, unrestricted download on Infineon's main website. : Click Target > Change Target to select
Execute the setup.exe or IMT4.exe file with Administrator permissions . Configure Target: Open MemTool and go to Target > Change .
This article provides a definitive, step-by-step guide to obtaining the official Memtool, explains its features, and warns against unsafe download practices. Often included in the development kits or DAS
Look for the result titled "MemTool - Flash Programming Tool."
Go to > Open and select the compiled firmware file you wish to write to the chip's flash memory. Step 5: Erase, Program, and Verify
Solution: The microcontroller selected in your Memtool target configuration does not match the actual chip connected to your hardware tool. Double-check the exact part number markings on the silicon.
Choose your hardware interface type (e.g., "DAS" if using a miniWiggler, or "ASC" if using a serial connection). Configure the connection speed (Baud rate/Frequency). Step 4: Open your Firmware File