The 0i-TF Plus is designed for complex turning operations. It excels in delivering high-quality surface finishes and faster cycle times, making it a favorite for modern machine tools. Key advantages include:
A common crash occurs due to improper reference return logic. The manual details (return via intermediate point). The TF Plus manual adds warnings about the High-speed positioning parameters that differ from older units.
O1001 (PART NUMBER 4582-A); (TOOL 0101 - OD ROUGH & FINISH); (TOOL 0303 - 60 DEG THREADING); (ROUGH TURNING SEQUENCE); G28 U0.0 W0.0; G50 S2000; T0101; G96 S180 M03; G00 X85.0 Z5.0 M08; G71 U2.5 R1.0; G71 P10 Q20 U0.4 W0.1 F0.25; N10 G00 X30.0; G01 Z0.0 F0.15; G01 X40.0 Z-5.0; G01 Z-25.0; G02 X60.0 Z-35.0 R10.0; G01 X80.0; N20 G01 Z-50.0; (FINISH TURNING SEQUENCE); G70 P10 Q20 F0.12; G00 X150.0 Z50.0 M09; M05; G28 U0.0 W0.0; (THREADING SEQUENCE M40X2.0); T0303; G97 S800 M03; G00 X45.0 Z5.0 M08; G76 P010060 Q100 R0.02; G76 X37.54 Z-22.0 P1230 Q250 F2.0; G00 X150.0 Z50.0 M09; M05; G28 U0.0 W0.0; M30; % Use code with caution. 9. Troubleshooting Common Alarm Codes fanuc series oitf plus programming manual
Manages two or more independent tool paths simultaneously.
Using the Fanuc Series OITF Plus programming manual provides several benefits, including: The 0i-TF Plus is designed for complex turning operations
A suite of functions that reduces non-cutting time and optimizes tool path processing for faster execution. [5.15, 5.18] Fine Surface Technology:
For features common to both lathe and machining center systems, refer to B-64694EN . Key Programming Content Included The manual details (return via intermediate point)
: This is the standard foundation for all FANUC systems. It uses preparatory functions (G-functions) and auxiliary functions (M-codes) to define machine movements and operations.
This comprehensive guide serves as your roadmap to understanding the core programming architecture, essential G-codes, canned cycles, and advanced macro programming features of the 0i-F Plus platform. 1. Introduction to the FANUC Series 0i-F Plus Architecture
Always couple G96 (Constant Surface Speed) with a sensible G50 speed ceiling. Failure to do so can spin the chuck up to unsafe speeds as tools cut closer to the center axis (
O9010 (Custom thread macro) #1 = #24 (X finish) #2 = #26 (Z finish) #3 = #18 (R – taper) #4 = #9 (F – pitch) G00 X[#1+2.] Z#2 G76 P010060 Q50 R50 G76 X#1 Z#2 R#3 P1000 Q200 F#4 M99