Equatech Universal Tv Wall Mount 32 To 100 Instructions

: The mount dimensions are approximately H43 x W36.8 x D1.1cm , allowing it to sit close to the wall for a sleek look. Installation Instructions Installing a universal mount like the

While the prospect of hanging a heavy, expensive display on your wall can feel daunting, this comprehensive guide will walk you through the preparation, placement, and step-by-step installation to ensure a secure and perfectly leveled setup. Pre-Installation Checklist

The Equatech Universal TV Wall Mount (32"-100") supports up to 55kg, featuring options for flat or tilted viewing (8 or 10 degrees). Installation requires securing the wall plate into studs using a level and attaching the brackets with appropriate M4, M6, or M8 hardware. For full product details and specifications, visit Home Bargains . Equatech Universal TV Wall Mount 32" - 100" - Home Bargains equatech universal tv wall mount 32 to 100 instructions

The Equatech kit includes a variety of bolt diameters (M4, M6, M8) and lengths.

This mount is a "tilting" model, allowing you to angle the screen downward slightly to reduce glare and improve the viewing angle from below. : The mount dimensions are approximately H43 x W36

VESA refers to the standard four-hole matrix on the back of your TV. Measure the distance between the horizontal holes and the vertical holes in millimeters (e.g., 200mm x 200mm, 400mm x 400mm, or 600mm x 400mm). The Equatech Universal Mount features an adjustable design that accommodates standard configurations up to the maximum width required for 100-inch panels. Step 2: Attaching the Brackets to the Back of the TV

: Offers three distinct positions, including a flat (flush) mount or adjustable 8° and 10° tilt angles for better viewing. Installation requires securing the wall plate into studs

The Equatech mount is "universal," but that doesn't mean it automatically fits every television. You must verify two key things:

Use the wall plate as a template to mark the exact locations for the pilot holes, ensuring the plate is perfectly level. Step 3: Secure the Wall Plate