Download File F6flpy-x64-non-vmd.zip _verified_ Jun 2026

Download File F6flpy-x64-non-vmd.zip _verified_ Jun 2026

If loading the Non-VMD driver fails to reveal your drive, restart your computer and enter the BIOS setup menu (usually by tapping F2, F12, or Del during startup). Check your storage configuration settings. If Intel VMD or RST mapping is turned on, you will need to go back and download the version instead. Alternatively, you can disable VMD in the BIOS to make the Non-VMD driver work.

Go to the official support page for your specific device (e.g., ASUS, Dell, HP, Lenovo, MSI, Gigabyte). Enter your serial number or model name, navigate to the "Drivers" section, and look under Storage , SATA , or Chipset for the Intel Rapid Storage Technology (RST) driver. Download File F6flpy-x64-non-vmd.zip

Navigate to Intel's official download page: Intel® Rapid Storage Technology Driver Installation Software with Intel® Optane™ Memory Download the latest SetupRST.exe file for your processor generation. The page clearly states which platforms each version supports (e.g., 12th to 15th Gen Intel Core platforms). If loading the Non-VMD driver fails to reveal

Copy these extracted files onto a USB drive (you can use the same USB drive you used to create your Windows installation media, provided it is formatted as FAT32). Step 2: Load the Driver During Setup Alternatively, you can disable VMD in the BIOS

The setup wizard will install the driver. Within a few moments, your internal SSD or hard drive will appear in the menu, allowing you to format the drive, create partitions, and proceed with your Windows installation. Troubleshooting Common Errors "No signed device drivers were found"

The file contains the Intel RST VMD Pre-Installation Driver (64-bit) for Windows. "F6" refers to the legacy Windows installation process where you press F6 to load third-party RAID or SCSI controllers. Non-VMD vs. VMD Drivers

In simple terms:

If loading the Non-VMD driver fails to reveal your drive, restart your computer and enter the BIOS setup menu (usually by tapping F2, F12, or Del during startup). Check your storage configuration settings. If Intel VMD or RST mapping is turned on, you will need to go back and download the version instead. Alternatively, you can disable VMD in the BIOS to make the Non-VMD driver work.

Go to the official support page for your specific device (e.g., ASUS, Dell, HP, Lenovo, MSI, Gigabyte). Enter your serial number or model name, navigate to the "Drivers" section, and look under Storage , SATA , or Chipset for the Intel Rapid Storage Technology (RST) driver.

Navigate to Intel's official download page: Intel® Rapid Storage Technology Driver Installation Software with Intel® Optane™ Memory Download the latest SetupRST.exe file for your processor generation. The page clearly states which platforms each version supports (e.g., 12th to 15th Gen Intel Core platforms).

Copy these extracted files onto a USB drive (you can use the same USB drive you used to create your Windows installation media, provided it is formatted as FAT32). Step 2: Load the Driver During Setup

The setup wizard will install the driver. Within a few moments, your internal SSD or hard drive will appear in the menu, allowing you to format the drive, create partitions, and proceed with your Windows installation. Troubleshooting Common Errors "No signed device drivers were found"

The file contains the Intel RST VMD Pre-Installation Driver (64-bit) for Windows. "F6" refers to the legacy Windows installation process where you press F6 to load third-party RAID or SCSI controllers. Non-VMD vs. VMD Drivers

In simple terms:

Go to Top