Inspect the RJ45 port for damaged pins. Verify the scale's static IP address settings in the Z-Mode configuration menu. Test the continuity of the network cable. Hardware Maintenance & Component Testing Thermal Printer Alignment & Cleaning

Connect the serial cables from the scale and pole display, ensuring the latches click into place.

Technical data on power requirements, weighing capacities, and environmental operating conditions.

Calibration is necessary if the scale shows incorrect weight readings or display errors.

: Equipped with 1x RJ45 (Ethernet), 1x RS232, and 1x RJ9 for cash drawer support; optional Wi-Fi is also available.

Ensure no weight is on the platter and press Total Print (*) . Place the required test weight (e.g., 3kg for a 15kg unit) and press Total Print again to set the span. 3. Network & IP Configuration

Select the physical chassis profile () by toggling the X key, then finalize the save by pressing * . ⚖️ Weight Calibration Routine

, with optional upgrades to 4MB or 8MB for up to 38,000 items Hardware & Interface

Which (printer, load cell, mainboard) are you working on?

Do you need the exact for network or label configurations? Share public link