: When a signal is detected, the meter will show increasing bars for signal strength and quality, accompanied by an audio beep Fine-Tuning

When the RV3 intercepts the satellite arc, the signal strength bar will jump upward, and the buzzer tone will rise in pitch.

The RV3 is moisture-resistant but not completely waterproof. Avoid using it during heavy downpours, and never submerge the unit.

Attenuates (reduces) high signal levels to help isolate the exact peak of a satellite beam. 2. Technical Specifications Specification Frequency Range 950 MHz – 2150 MHz Input Level Range -40 dBm to -10 dBm Impedance Insertion Loss ≤ 5.0 dB Operating Voltage DC 13 V – 18 V (supplied by receiver) Connectors F-Type Female (Input / Output) 3. Port Configuration & Controls

: If the meter reaches 100% (full scale), use the control knob to reduce the level back down to 50% and continue fine-tuning until you reach the highest possible reading. Troubleshooting Tips

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Used to adjust the sensitivity (Attenuation) of the meter. 3. Connecting the RV3

You must tell the meter what type of LNB you are using.